Anodized Aluminum Cyclone With a Flow of 16.7Lpm and a 2.5µm Cutpoint
Specifications
- Anodized Aluminum
- 16.7Lpm Flow Rate, 2.5µm Cutpoint
- Removable Top for Easy Cleaning
- Dimensions: 4.8" x 6.6" x 2.3" (12.2 x 16.8 x 5.8 cm)
- Weight: 2.1 lb (1 kg)
EPA Approved
-
EQPS-0316-233: “Met One Instruments, Inc. E-FRM,” configured for filter sampling of ambient particulate matter using the US EPA PM10 inlet specified in 40 CFR Appendix L, Figs. L-2 thru L-19, equipped with a URG-2000-30EGN Cyclone particle size separator, and operated for a continuous 24-hour sample period at a flow rate of 16.67 liters/minute, using 47 mm PTFE membrane filter media, and operating with firmware version R1.1.0 and later, and operated in accordance with Met One E-FRM PM2.5 operating manual.
-
EQPS-0316-233: “URG-MASS100 Single PM2.5 Sampler,” operated with firmware version 4B or 5.0.1, configured for “Single 2.5” operation with a URG-2000-30EGN Cyclone Particle Size Separator, and operated for a continuous 24-hour sample period at a flow rate of 16.67 liters/minute, and in accordance with the URG-MASS100 Operator’s Manual and with the requirements and sample collection filters specified in 40 CFR part 50, appendix L.
-
EQPS-0316-234: “URG-MASS300 Sequential PM2.5 Sampler,” operated with firmware version 4B or 5.0.1, configured for “Multi 2.5” operation with a URG-2000-30EGN Cyclone particle size separator, and operated for a continuous 24-hour sample period at a flow rate of 16.67 liters/minute, and in accordance with the URG-MASS300 Operator’s Manual and with the requirements and sample collection filters specified in 40 CFR part 50, appendix L.
-
EPA has determined, in accordance with 40 CFR part 53, that these methods should be designated as equivalent methods.
Flow Rate and Cut Point
URG-2000-30EGN-TC | 16.7Lpm, 2.5µm
| Flow Rate | 10 | 11 | 12 | 19 | 14 | 15 | 16 | 17 | 18 | 19 | 20 |
| Cut-Point | 4.53 | 4.05 | 3.62 | 3.34 | 3.06 | 2.83 | 2.62 | 2.44 | 2.29 | 2.15 | 2.02 |
